Trisul Network Analytics
Developer Zone

User Tools

Site Tools

You are here: Home » Articles » How to map port name from ifTable to a dot1QVLAN ID and Name
Trace:
articles:portvlanid

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
articles:portvlanid [2021/04/21 17:14] – veeraarticles:portvlanid [2021/04/21 17:17] – [MIBS needed] veera
Line 12: Line 12:
   - To retrieve the name of the VLAN . get the full .dot1qVlanStaticTable (.1.3.6.1.2.1.17.7.1.4.3)  ''snmpwalk .1.3.6.1.2.1.17.7.1.4.3''   - To retrieve the name of the VLAN . get the full .dot1qVlanStaticTable (.1.3.6.1.2.1.17.7.1.4.3)  ''snmpwalk .1.3.6.1.2.1.17.7.1.4.3''
   - Get the dot1qVlanStaticName .1.3.6.1.2.1.17.7.1.4.3.1.1 against the table index.   - Get the dot1qVlanStaticName .1.3.6.1.2.1.17.7.1.4.3.1.1 against the table index.
 +
 +
 +===== MIBS needed =====
 +
 +The following MIB modules are referenced. You can use Unbrowse SNMP to load them all from the [[MIB Packages page]]https://www.unleashnetworks.com/products/unbrowse-snmp/mib-packages.html   Use the Riverstone package which contains the packages.
 +
 +  * IF-MIB
 +  * Q-BRIDGE-MIB
 +  * BRIDGE-MIB
 +
 +
 +
 +
 +
 +
  
  
  
    
articles/portvlanid.txt · Last modified: 2021/04/21 17:20 by veera