====== Monit Trisul Process =====
This document explains how you can use monit to keep your Trisul Probe processes running.
Your Trisul Probe processes should never stop. If you are seeing crashes or memory issues , please read "[[admin:debuggingcrash|Debugging Trisul Probe Crashes]]" and help us debug your setup. This guide is useful when Trisul is in production and you want to ensure uptime.
===== Install Monit on Ubuntu 16.04 and 18.04 =====
apt-get install monit
===== Edit Configuration =====
1. Open the monitrc configuration file
sudo vi /etc/monit/monitrc
2. Add following lines at the end of file
check process trisul_probe_context0 with pidfile /usr/local/var/lib/trisul-probe/domain0/probe0/context0/run/trisul-probe.pid
start program = "/usr/local/bin/trisulctl_probe start context context0@probe0"
stop program = "/usr/local/bin/trisulctl_probe stop context context0@probe0"
This snippet monitors the trisul probe process and restarts if stopped.
3. Restart the monit
systemctl restart monit
4. Start monit on boot
systemctl enable monit
====== Advanced configuration - email when monit restarts ======
You can have monit restart stopped processes and email you when that happens. Just copy the following snippet into /etc/monit/monitrc
===== Email configuration for monit =====
If you want to receive email for trisul process status please add following lines in monitrc file
set mail-format {
from: xxx@abc.com
reply-to: abc@xxx.com
subject: Trisul Monit $SERVICE $EVENT at $DATE
message: Monit $ACTION $SERVICE at $DATE on $HOST: $DESCRIPTION.
Yours sincerely,
Trisul Network Analytics
}
set mailserver smtp.gmail.com port 587
username "xxx@abc.com" password "xxxxxxxxxxxxx"
using tlsv1
set alert abc@xxx.com on {nonexist, timeout,resource}
===== Sample File =====
###############################################################################
## Monit control file
###############################################################################
##
## Comments begin with a '#' and extend through the end of the line. Keywords
## are case insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/'.
##
## Below you will find examples of some frequently used statements. For
## information about the control file and a complete list of statements and
## options, please have a look in the Monit manual.
##
##
###############################################################################
## Global section
###############################################################################
##
## Start Monit in the background (run as a daemon):
#
set daemon 120 # check services at 2-minute intervals
# with start delay 240 # optional: delay the first check by 4-minutes (by
# # default Monit check immediately after Monit start)
#
#
## Set syslog logging. If you want to log to a standalone log file instead,
## specify the full path to the log file
#
set logfile /var/log/monit.log
#
#
## Set the location of the Monit lock file which stores the process id of the
## running Monit instance. By default this file is stored in $HOME/.monit.pid
#
# set pidfile /var/run/monit.pid
#
## Set the location of the Monit id file which stores the unique id for the
## Monit instance. The id is generated and stored on first Monit start. By
## default the file is placed in $HOME/.monit.id.
#
# set idfile /var/.monit.id
set idfile /var/lib/monit/id
#
## Set the location of the Monit state file which saves monitoring states
## on each cycle. By default the file is placed in $HOME/.monit.state. If
## the state file is stored on a persistent filesystem, Monit will recover
## the monitoring state across reboots. If it is on temporary filesystem, the
## state will be lost on reboot which may be convenient in some situations.
#
set statefile /var/lib/monit/state
#
#
## Set limits for various tests. The following example shows the default values:
##
# set limits {
# programOutput: 512 B, # check program's output truncate limit
# sendExpectBuffer: 256 B, # limit for send/expect protocol test
# fileContentBuffer: 512 B, # limit for file content test
# httpContentBuffer: 1 MB, # limit for HTTP content test
# networkTimeout: 5 seconds # timeout for network I/O
# }
## Set global SSL options (just most common options showed, see manual for
## full list).
#
# set ssl {
# verify : enable, # verify SSL certificates (disabled by default but STRONGLY RECOMMENDED)
# selfsigned : allow # allow self signed SSL certificates (reject by default)
# }
#
#
## Set the list of mail servers for alert delivery. Multiple servers may be
## specified using a comma separator. If the first mail server fails, Monit
# will use the second mail server in the list and so on. By default Monit uses
# port 25 - it is possible to override this with the PORT option.
#
# set mailserver mail.bar.baz, # primary mailserver
# backup.bar.baz port 10025, # backup mailserver on port 10025
# localhost # fallback relay
#
#
## By default Monit will drop alert events if no mail servers are available.
## If you want to keep the alerts for later delivery retry, you can use the
## EVENTQUEUE statement. The base directory where undelivered alerts will be
## stored is specified by the BASEDIR option. You can limit the queue size
## by using the SLOTS option (if omitted, the queue is limited by space
## available in the back end filesystem).
#
set eventqueue
basedir /var/lib/monit/events # set the base directory where events will be stored
slots 100 # optionally limit the queue size
#
#
## Send status and events to M/Monit (for more informations about M/Monit
## see http://mmonit.com/). By default Monit registers credentials with
## M/Monit so M/Monit can smoothly communicate back to Monit and you don't
## have to register Monit credentials manually in M/Monit. It is possible to
## disable credential registration using the commented out option below.
## Though, if safety is a concern we recommend instead using https when
## communicating with M/Monit and send credentials encrypted.
#
# set mmonit http://monit:monit@192.168.1.10:8080/collector
# # and register without credentials # Don't register credentials
#
#
## Monit by default uses the following format for alerts if the the mail-format
## statement is missing::
## --8<--
## set mail-format {
## from: monit@$HOST
## subject: monit alert -- $EVENT $SERVICE
## message: $EVENT Service $SERVICE
## Date: $DATE
## Action: $ACTION
## Host: $HOST
## Description: $DESCRIPTION
##
## Your faithful employee,
## Monit
## }
## --8<--
##
## You can override this message format or parts of it, such as subject
## or sender using the MAIL-FORMAT statement. Macros such as $DATE, etc.
## are expanded at runtime. For example, to override the sender, use:
#
# set mail-format { from: monit@foo.bar }
#
#
## You can set alert recipients whom will receive alerts if/when a
## service defined in this file has errors. Alerts may be restricted on
## events by using a filter as in the second example below.
#
# set alert sysadm@foo.bar # receive all alerts
#
## Do not alert when Monit starts, stops or performs a user initiated action.
## This filter is recommended to avoid getting alerts for trivial cases.
#
# set alert your-name@your.domain not on { instance, action }
#
#
## Monit has an embedded HTTP interface which can be used to view status of
## services monitored and manage services from a web interface. The HTTP
## interface is also required if you want to issue Monit commands from the
## command line, such as 'monit status' or 'monit restart service' The reason
## for this is that the Monit client uses the HTTP interface to send these
## commands to a running Monit daemon. See the Monit Wiki if you want to
## enable SSL for the HTTP interface.
#
# set httpd port 2812 and
# use address localhost # only accept connection from localhost
# allow localhost # allow localhost to connect to the server and
# allow admin:monit # require user 'admin' with password 'monit'
#
###############################################################################
## Services
###############################################################################
##
## Check general system resources such as load average, cpu and memory
## usage. Each test specifies a resource, conditions and the action to be
## performed should a test fail.
#
# check system $HOST
# if loadavg (1min) > 4 then alert
# if loadavg (5min) > 2 then alert
# if cpu usage > 95% for 10 cycles then alert
# if memory usage > 75% then alert
# if swap usage > 25% then alert
#
#
## Check if a file exists, checksum, permissions, uid and gid. In addition
## to alert recipients in the global section, customized alert can be sent to
## additional recipients by specifying a local alert handler. The service may
## be grouped using the GROUP option. More than one group can be specified by
## repeating the 'group name' statement.
#
# check file apache_bin with path /usr/local/apache/bin/httpd
# if failed checksum and
# expect the sum 8f7f419955cefa0b33a2ba316cba3659 then unmonitor
# if failed permission 755 then unmonitor
# if failed uid root then unmonitor
# if failed gid root then unmonitor
# alert security@foo.bar on {
# checksum, permission, uid, gid, unmonitor
# } with the mail-format { subject: Alarm! }
# group server
#
#
## Check that a process is running, in this case Apache, and that it respond
## to HTTP and HTTPS requests. Check its resource usage such as cpu and memory,
## and number of children. If the process is not running, Monit will restart
## it by default. In case the service is restarted very often and the
## problem remains, it is possible to disable monitoring using the TIMEOUT
## statement. This service depends on another service (apache_bin) which
## is defined above.
#
# check process apache with pidfile /usr/local/apache/logs/httpd.pid
# start program = "/etc/init.d/httpd start" with timeout 60 seconds
# stop program = "/etc/init.d/httpd stop"
# if cpu > 60% for 2 cycles then alert
# if cpu > 80% for 5 cycles then restart
# if totalmem > 200.0 MB for 5 cycles then restart
# if children > 250 then restart
# if loadavg(5min) greater than 10 for 8 cycles then stop
# if failed host www.tildeslash.com port 80 protocol http
# and request "/somefile.html"
# then restart
# if failed port 443 protocol https with timeout 15 seconds then restart
# if 3 restarts within 5 cycles then unmonitor
# depends on apache_bin
# group server
#
#
## Check filesystem permissions, uid, gid, space and inode usage. Other services,
## such as databases, may depend on this resource and an automatically graceful
## stop may be cascaded to them before the filesystem will become full and data
## lost.
#
# check filesystem datafs with path /dev/sdb1
# start program = "/bin/mount /data"
# stop program = "/bin/umount /data"
# if failed permission 660 then unmonitor
# if failed uid root then unmonitor
# if failed gid disk then unmonitor
# if space usage > 80% for 5 times within 15 cycles then alert
# if space usage > 99% then stop
# if inode usage > 30000 then alert
# if inode usage > 99% then stop
# group server
#
#
## Check a file's timestamp. In this example, we test if a file is older
## than 15 minutes and assume something is wrong if its not updated. Also,
## if the file size exceed a given limit, execute a script
#
# check file database with path /data/mydatabase.db
# if failed permission 700 then alert
# if failed uid data then alert
# if failed gid data then alert
# if timestamp > 15 minutes then alert
# if size > 100 MB then exec "/my/cleanup/script" as uid dba and gid dba
#
#
## Check directory permission, uid and gid. An event is triggered if the
## directory does not belong to the user with uid 0 and gid 0. In addition,
## the permissions have to match the octal description of 755 (see chmod(1)).
#
# check directory bin with path /bin
# if failed permission 755 then unmonitor
# if failed uid 0 then unmonitor
# if failed gid 0 then unmonitor
#
#
## Check a remote host availability by issuing a ping test and check the
## content of a response from a web server. Up to three pings are sent and
## connection to a port and an application level network check is performed.
#
# check host myserver with address 192.168.1.1
# if failed ping then alert
# if failed port 3306 protocol mysql with timeout 15 seconds then alert
# if failed port 80 protocol http
# and request /some/path with content = "a string"
# then alert
#
#
## Check a network link status (up/down), link capacity changes, saturation
## and bandwidth usage.
#
# check network public with interface eth0
# if failed link then alert
# if changed link then alert
# if saturation > 90% then alert
# if download > 10 MB/s then alert
# if total upload > 1 GB in last hour then alert
#
#
## Check custom program status output.
#
# check program myscript with path /usr/local/bin/myscript.sh
# if status != 0 then alert
#
#
###############################################################################
## Includes
###############################################################################
##
## It is possible to include additional configuration parts from other files or
## directories.
#
include /etc/monit/conf.d/*
include /etc/monit/conf-enabled/*
#
check process trisul with pidfile /usr/local/var/lib/trisul-probe/domain0/probe0/context0/run/trisul-probe.pid
start program = "/usr/local/bin/trisulctl_probe start context default@probe0"
stop program = "/usr/local/bin/trisulctl_probe stop context default@probe0"
check process trisul_flushd with pidfile /usr/local/var/lib/trisul-hub/domain0/hub0/context0/run/flushd.pid
start program = "/usr/local/bin/trisulctl_hub start context default@hub0"
stop program = "/usr/local/bin/trisulctl_hub stop context default@hub0"