tips:netflow_troubleshooting
This is an old revision of the document!
Table of Contents
Troubleshooting Netflow
This article explains how you can troubleshoot the following problem.
No data on the dashboard after enabling Netflow in Trisul Network Analytics.
Precondition
This configuration must have been already done in your network.
- Trisul Network Analytics installed in Netflow mode
- Atleast one device configured to send Netflow to Trisul IP address
- Wait for atleast 5 minutes after starting Trisul
If there is still no data in Trisul, please run through the following checklist.
Checklist
tips/netflow_troubleshooting.1584529986.txt.gz · Last modified: 2020/03/18 16:43 by navaneeth